Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

I want to thank all that responed to my original post. I don't have any type of hydraulic hookups installed on this tractor, so hooking up to a loader valve or power beyond isn't an option that I have. After looking in my service manual it seems as if I might beable to tap into the pressure side by unsrcewing a plug and just screw in the appropriate fitting, but I can't find anyway to tap into the return side. I don't know, maybe I am barking up the wrong tree. If that is so, I might just have to bite the bullet and buy a PTO pump and find a place to put a resevoir on the splitter.Richard <br>

Quick Connect hydraulic lines JD650
Operating and Attachments
Replies 2 Post by Richard Burge

I have a 3pt hitch hydraulic log splitter that I have put together. The only problem I have is that my 650 JD does not have hydraulic lines to hook into the splitter.<br>I can use a pto powered pump to run the splitter but I would rather use the quick disconnect lines and the tractor hydrualic system(Much cheaper). Tell if I am wrong, but all I need is a pressure line and a return line. How can I install these lines myself?Richard

Quick connect hydraulic lines
Operating and Attachments
Replies 4 Post by Richard Burge

Anthony,

I have assembled the 821 Caddigger. It will and can do everything that is said about it. If you have any questions, feel free to email me at
rburge@i-55.com

Richard

METKIT BACKHOE GIVE ME INSIGHT
Loaders Back Hoes
Replies 6 Post by Richard Burge